3.Click the Cache tab.
4.Choose one of the following options:
v Clear the Enable Caching check box. If you choose this option, Java caching is always disabled.
vClick Clear Caching. If you choose this option, you must click Clear Caching after each Remote Supervisor Adapter II firmware update.
Remote console
A remote console is an interactive graphical user interface (GUI) display of the server, viewed on your computer. You see on your monitor exactly what is on the server console, and you have keyboard and mouse control of the console.
To remotely access a server console, complete the following steps:
1.Log in to the Remote Supervisor Adapter II. For more information, see Chapter 2, “Opening and using the Web interface,” on page 5.
2.In the navigation pane, click Remote Control. A page similar to the one in the following illustration is displayed.
3.To control the server remotely, use one of the links at the bottom of the Remote Control page. If you want exclusive remote access during your session, click Start Remote Control in Single User Mode. If you want to allow other users remote console (KVM) access during your session, click Start Remote Control in
Note: The Remote Disk function does not support multiple users.
You can close the Remote Control window to disconnect from viewing the server console.
Notes:
1.Do not close the Remote Control window if a remote disk is currently mounted. See step 7 on page 85 for instructions for closing and unmounting a remote disk.
2.If you have mouse or keyboard problems when using Remote Control, see the help that is available from the Remote Control page in the Web interface.
3.If you use the remote console to change settings for the Remote Supervisor Adapter II in the server Configuration/Setup Utility program (Advanced Setup → RSA II Settings), the server restarts the adapter and you lose the remote
82 Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User’s Guide
