UK
CALL TRANSFER
FIG. 5.3 When using your headset during a call, you can transfer the call back to your telephone. PRESS and HOLD the CALL CONTROL button. You will hear a tone when you press the CALL CONTROL button.
When you hear a second tone, the call has been transferred and you may release the CALL CONTROL button.
CALL REJECT
FIG. 5.3 When your telephone handset is ringing, you can reject the call without answering. PRESS and HOLD the CALL CONTROL button. You will hear a tone when you press the CALL CONTROL button.
When you hear a second tone, the call has been rejected and you may release the CALL CONTROL button.
LAST NUMBER REDIAL
FIG. 5.3 When making a call, you can dial the last number called using your headset. PRESS the CALL CONTROL button twice to redial the last number. Each time you press the CALL CONTROL button you will hear a tone. You will hear another tone when the last number has been redialled.
Check the display on your telephone for call progress.
5. REPLACING OR INSTALLING A NEW BATTERY
IMPORTANT: If your headset stops responding to button presses, remove and
FIG. 6.1 Open the battery compartment by pushing back on the battery door.
FIG. 6.2 Remove the battery by pulling on the tab to expose the red and black wires and battery connector. Gently pull at the base of the wires to unplug the battery.
FIG. 6.3 To install a new battery, insert the battery plug as shown in the illustration. Fold the wire under the battery pack and gently push the battery in place. Replace the battery door by pushing it forward until it snaps shut.
6. TROUBLESHOOTING
PROBLEM
My headset stops responding to button presses.
Remove and
PROBLEM
My headset does not work with my telephone.
Ensure your headset is turned on. See Section 1.ii for detailed instructions.
Ensure the battery is fully charged.
Ensure your telephone is turned on, properly charged, and able to make calls.
Ensure the Bluetooth™ feature of your telephone is turned on.
Refer to your mobile telephone user guide for specific instructions, or visit www.plantronics.com to view pairing instructions for your model of telephone.
PROBLEM
Callers cannot hear me.
Ensure the microphone (see Figure 4.3) is positioned properly toward your mouth.
Check that the headset is not in mute mode (see Figure 5.2).
PROBLEM
I cannot hear callers.
Increase the volume using the VOLUME UP control (see Figure 5.2).
Ensure the headset speaker (see Figure 4.2) is positioned snugly over your ear.
UK
UK D DK E F I N NL P SF S
11 |
| 12 |
