![](/images/new-backgrounds/1236555/23655525x1.webp)
Use Your Headset with Microsoft Office Communicator
Powering Headset On/Off
The headset will be ready to use once it has been charged as described in Charging your
Headset.
To power the headset on press and hold the Power On/Off button for two seconds. The headset indicator light will remain solid blue for two seconds to confirm that the headset is powered on.
Indicator Light
Power On/Off Button
NOTE The Bluetooth USB adapter indicator light will remain solid blue when the headset is powered on and paired to the headset. The blue LED on the Bluetooth USB Adapter will turn off if the Bluetooth USB Adapter cannot air or connect to the headset.
To conserve power you may optionally power the headset off by pressing the Power On/Off for two seconds. The headset indicator light will remain solid red for two seconds to confirm that the headset is powered off.
NOTE While powered off you will not be able to use the headset.
Placing, Answering, and Ending Calls with Microsoft Lync/Office Communicator
To place a call
To answer a call on the headset
To answer a call when already on an active call on your mobile phone
Dial number using Microsoft Lync/Office Communicator.*
Short press call button on headset.
Short press the call button once to end the mobile phone call then press again to answer your Microsoft Lync/Office Communicator call.
To end a call on the headset Short press call button on headset.
*Consult Microsoft Lync/Office Communicator Help for more information on how to place a call.
13