Plantronics W445-M 4 System Setup

Plantronics Savi User Guide 8

1 Connect the base power supply into the power jack on

the Deluxe Charger Base.

2 Connect the power supply to the outlet. The power

indicator light will be solid green.

1 Gently push the headset into the charging cradle.

The charging indicator light on the headset will ash white to

indicate that the headset battery is charging and will turn solid

white when fully charged.

2 Charge for at least 20 minutes prior to ﬁrst use. A full

charge takes 3 hours.

Charging Indicator Light

CHARGING TIME

20 min .....................

Minimum charge

before ﬁrst use

3 hours ...................

Full charge

Power Indicator Light

NOTE The USB charging cable can also be used to charge

the headset.

To successfully charge your headset with the USB cable

the PC must be on and in an active state (not standby). The

charging time will vary according to the number of other

devices drawing power from the PC’s USB port(s).

Both the Deluxe Charge Base and Deluxe Charging Cable

can charge both the headset battery and the spare battery

simultaneously or independently if desired. The spare battery

is shipped with Savi 445 in the Deluxe Charger Base battery

compartment. See “Replacing Your Headset Battery”for details

on replacing your battery even during a call.

Charging the Battery in the Charge Base.

1 Ensure the deluxe charger base is powered on and the

battery is correctly seated in the battery compartment.

While charging the battery charge indicator will ﬂash green;

once fully charged the charge indicator will be solid green.

Charging the Battery in the Deluxe USB Charger.

1 Connect the USB charger to an available USB port on

the PC.

2 Set the battery on the battery-shaped receptacle and

gently push down. Then slide the battery in the direction

shown until the battery clicks into place. While charging

the battery charge indicator will ﬂash green; once fully charged

the charge indicator will be solid green.

4 System Setup