PLUS Vision U4-237 user manual Quick Color Adj, Gamma, Select the preset color mode

Color

•Do the following operation while displaying the image you want to adjust or set.

•Select the menu name “Color”.

See “Menu Operation Method” on Page E-35 for information about performing menu operations. The item name display will differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-40.

Quick Color Adj.

Select the preset color mode.

Select the “Quick Color Adj.” item name and select the setting contents with the SELECT ￿￿ buttons.

Color	Select this to prioritize color.
Standard	Select this to prioritize brightness.

*When “Color” or “Standard” is selected, the “Gamma”, “Color Temp.” and “White” adjustment items are displayed in gray and cannot be selected or adjusted.

Custom ....... “Gamma”, “Color Temp.” and “White” adjustment items can be selected and adjusted

*The selected values for the different adjustment items are stored in the memory so the desired color adjustments can be set.

Gamma

Gamma corrects the proportion of change of the dark portions from the bright portions of the input signal.

Set this to reproduce natural color tone or to distinctly project a per- sonal computer picture in a bright conference room.

Select the “Gamma” item name and select the setting contents with the SE-

LECT ￿￿ buttons.

Normal	Correction with standard settings
Natural	Corrects for natural color tones
Real	Corrects with emphasis on brightness

Note:

When “Color” or “Standard” is selected for “Quick Color Adj.”, the “Gamma” adjust- ment item is displayed in gray and cannot be selected or adjusted.

E-44