PLUS Vision U4-237 Vertical Flip / Horizontal Flip, Keystone Save, View, Cable is unplugged

View

Vertical Flip / Horizontal Flip

In selecting the method of projecting to the screen, these functions are set when the projector is in a rear screen installation.

Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting contents with the SELECT ￿￿ buttons.

“Vertical Flip” Off	“Vertical Flip” Off	“Vertical Flip” On	“Vertical Flip” On
“Horizontal Flip” Off	“Horizontal Flip” On	“Horizontal Flip” On	“Horizontal Flip” Off

Keystone

Keystone distortion will occur when the projector and screen are on an angle (in the vertical orientation). This function is used to correct this distortion.

Select the item name “Keystone” and correct the keystone distortion using the

SELECT ￿ ￿ buttons.

Press the “￿” button. Press the “￿” button.

Note:

*The menus and other on-screen displays cannot be adjusted.

*Please note that depending on the projected picture and the projection condi- tions, it may not be possible to eliminate keystone distortion completely.

Keystone Save

This function is used to save the keystone adjustment values.

Setting Keystone Save to on will set the previous keystone adjustment values when projecting after the power cable has been disconnected and then re- connected.

Select the item name “Keystone Save” and set with the SELECT ￿￿ buttons.

Off	The keystone adjustment values return to the initial values when the power
	cable is unplugged.
On	The keystone adjustment values are retained in storage even when the
	power cable has been unplugged.

Note:

Regardless of whether Keystone Save is set to “On” or “Off”, when projection is from the standby condition, the picture is projected using the previous keystone adjustment values.

E-48