Setup
•Select menu name “Setup”.
See “Menu Operation Method” on Page
Color B/W Switching | Applicable Projector: |
Documents, spreadsheets or other mostly black and white data can be projected with stronger brightness.
It is possible to switch between the black/white and color mode while an image is being projected.
Select the “Color B/W Switching” item name, then use the and SELECT buttons to select the desired setting.
Color | The color image projection mode is set. |
B/W | The high brightness black/white image projection mode is set. |
Auto Source
The Auto Source function automatically detects the input signal when the power supply is switched on and when the input is switched.
Select the item name “Auto Source” and select the setting contents with the
SELECT () buttons.
On | Switches on the automatic detection function |
Off | Switches off the automatic detection function |
Signal Detection Order When On
The sequence of RGB → VIDEO →
When a signal is detected, the search is stopped and the image is projected.
Auto Power Off
This function switches off the projector power automatically when the input of the projector enters a
Select item name “Auto Power Off” and select the setting contents with the
SELECT () buttons.
On | The power is switched off when there is no signal. |
Off | The power is not switch off even when there is no signal. |
Operation when Function is On
•The “No Signal Power Off” display appears when a
•If a signal is input during the appearance of the display and an operation button other than the STANDBY button is pressed, the display is closed and the function is cancelled.
Note:
Some video decks and other equipment output a blue background or other video when playback ends. When this happens, a signal is being input to the projector and Auto Power Off is not activated.
