PLUS Vision U7-137 Finishing, Switch off the power of the connected equipment, E-24, Warrning

Power Cable Connections and Switching the Power On/Off

Finishing

1 Switch off the power of the connected equipment

2 Switch off the power of the projector

Press the STANDBY button.

STATUS STANDBY

(button on main unit)

STANDBY LASER

RGB VIDEO AUTO

MENUQUICK

Q

The [Power Off] display appears.

When the level gauge reaches maximum, the projection screen will go off (in about 5 seconds) and the projector will enter the power-off operation.

Note

*The operation can be cancelled by pressing a button other than the STANDBY button.

*One more press of the STANDBY button will switch off the power.

The STANDBY indicator changes to blinking amber and lights a steady amber after about 90 seconds (when the unit enters the standby mode).

Power Off

OK ?

			Blinking amber		Lit amber
	Lit green		(Approximately 90 seconds)		Standby mode
STATUS	STANDBY	STATUS	STANDBY	STATUS	STANDBY

3 Unplug the power cable

Check that the STANDBY indicator is lit in amber and then unplug the power cable.

The STANDBY indicator will go off when the power cable is unplugged.

Warrning

Do not unplug the power cable while the STANDBY indicator is blinking amber. Doing so may shorten the life of the lamp or damage the projector.

E-24