SOYO SY-5EHM, ETEQ82C663 PCI Power On, ROM PCI/ISA Bios Cmos Setup Utility Award SOFTWARE, INC

Hardware Setup SY-5EHM/5EH5 V1.3

Step 19. Power On

You have now completed the hardware installation of your Motherboard successfully.

1.Turn the power on

2.To enter the BIOS Setup Utility, press the <DEL> key while the system is performing the diagnostic checks,

Note: If you have failed to enter the BIOS, wait until the boot up sequence is completed. Then push the RESET button and press <DEL> key again at the beginning of boot-up, during diagnostic checks.

Repeat this operation until you get the following screen.

3. The BIOS Setup screen appears:

ROM PCI/ISA BIOS

CMOS SETUP UTILITY

AWARD SOFTWARE, INC.

STANDARD CMOS SETUP		INTEGRATED PERIPHERALS
BIOS FEATURES SETUP		SUPERVISOR PASSWORD
CHIPSET FEATURES SETUP		USER PASSWORD
POWER MANAGEMENT SETUP		IDE HDD AUTO DETECTION
PNP/PCI CONFIGURATION		SAVE & EXIT SETUP
LOAD SETUP DEFAULTS		EXIT WITHOUT SAVING
LOAD BIOS DEFAULTS
Esc	: Quit	↑ ↓ → ←	: Select Item
F10	: Save & Exit Setup	(Shift) F2	: Change Color

Time, Date, Hard Disk Type…

You are now ready to configure your system with the BIOS setup program. Go to Chapter 3: BIOS SETUP

35