SOYO ETEQ82C663 PCI Memory Parity, Check/ ECC, Typematic Settings Description, Rate Setting, Msec

BIOS Setup Utility			SY-5EHM/5EH5 V1.3
System Boot Control Settings (continued)
System Boot	Setting		Description	Note
Control Settings
Gate A20 Option
	Normal
	Fast		Allows RAM access	Default
			above 1MB using the
			fast gate A20 line.
Memory Parity
	Enabled		This allows to perform a	Default
Check/ ECC			redundancy check on the
Check			parity bit in the data
			strings. This method is
			used for error detection
			when the parity is not
			found.
	Disabled
3-2.4 Typematic Settings
Typematic		Setting	Description	Note
Settings
Typematic
		Disabled		Default
Rate Setting		Enabled	Enables to adjust the
			keystroke repeat rate.
The following [Typematic Rate] and [Typematic Delay] fields are
active only if [Typematic Rate Setting] is set to [Enabled]
Typematic Rate
		6 (Char/sec)	Choose the rate at which	Default
(Chars/Sec)		8 (Char/sec)	a character is repeated
		10 (Char/sec)	when holding down a
		12 (Char/sec)	key.
		15 (Char/sec)
		20 (Char/sec)
		24 (Char/sec)
		30 (Char/sec)
Typematic Delay
		250 (msec)	Choose how long after	Default
(Msec)		500 (msec)	you press a key down
		750 (msec)	the character begins
		1000 (msec)	repeating.

44