Wearthe Heart Rate Sensor
1. Moistenthe electrode areas of the strap.
PictureB1.
2. Attachthe connector to the strap. Picture
B2.
3. Adjustthe strap length to fit tightly but
comfortably.
4. Tiethe strap around your chest, just below
thechest muscles, and attach the hook to
theother end of the strap. Picture B3.
5. Checkthat the moist electrode areas are
firmlyagainst your skin and that the Polar
logoof the connector is in a central and
uprightposition. Picture B4.
Detachthe connector from the strap and rinse
thestrap under running water after every use.
Sweatand moisture may keep the electrodes
wetand the heart rate sensor activated. This
willreduce the transmitter battery life.
Seedetailed washing instructions in the Caring
forYour Heart Rate Sensor section or at
www.polar.com/support.
2ENGLISH