Sharpness
This sets the sharpness of the image that will be captured. * Hard / Normal / Soft
Saturation
This sets the saturation of the image that will be captured. * High / Normal / Low
White Balance
This sets the white balance for a variety of lighting conditions and adjusts the images overall color according to the surrounding light conditions. Use this function if image color appears unnatural.
*[Blank] Auto (for most photographic scenes)
*[ $ ] Tungsten
*[ & ] Fluorescent 1
*[ * ] Fluorescent 2
*[ % ] Daylight
*[ # ] Cloudy
*[ ( ] Manual (Refer to the section in this manual titled “Setting Manual White Balance” for further details.)
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the ISO number is increased), images taken under low lighting or darker areas of the image will be seen, but the image may be more pixelated/grainier overall. As a "rule of thumb" the higher the ISO value the more grain in the image.
*[Blank] Auto
*[ 5 ] ISO 100
*[ 7 ] ISO 200
*[ 9 ] ISO 400
Metering
This sets the metering method for calculating the exposure.
*Center: Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.
*Multi: The entire area of the screen is measured, and the exposure is calculated.
*Spot: A very small portion of the center of the screen is measured to calculate the correct exposure.
Color
This sets the overall color of the image that will be captured.
* Normal / Vivid / Sepia / Monochrome / Blue / Red / Green / Yellow / Purple
