IR Board Removal and Replacement
Note: Before disassembly of any part the TV, make sure the power is OFF, and the power cord is removed from the wall outlet. Allow time for power within all system boards to discharge before you begin disassembly. Never insert any objects into the vent holes in the TV case.
(1)Disassemble rear control box cover and rear cabinet cover.
(2)2. Remove screws 1 and 2 and replace IR board (PIC1).
PIC1
PIC1
1
2
Note: Before returning this product to the end user, you must follow the steps outlined in the section, Before Returning This Product to the User, on page 19. This procedure ensures that the chassis will not cause electric shock.
33 | www.polaroid.com |
