English

If the flash or focus is not correct. . .

When the caution symbol and the following error indicators appear:

Your subject is too close. The number “0.1” is displayed. Release shutter button and stand at least 0.6 m (2 ft.) from subject.

Your subject is beyond flash range. A number from 4.8 to 6.2 is displayed. Release shutter button and position your subject within the 0.6 m to 4.6 m (2-15 ft.) flash range.

Your subject is within range, but the flash is off. A number from 0.6 to 4.6 is displayed. Slide the flash switch up to turn flash on.

Note: Distance readings do not appear when subject is beyond 6.2 m (20 ft).

Using Self-timer

Place camera on tripod or other secure surface and set up photo. Press shutter button halfway and release button. Slide self-timer switch down. You have 12 seconds before self-timer activates shutter release. Camera beeps and red light flashes for 10 seconds, then beeps steadily and red light shines continuously for an addi- tional two seconds before taking photo.

Slide self-timer up. Photo ejects automatically.

Note: To avoid double exposure, do not close camera before sliding self-timer up.

9

Page 10
Image 10
Polaroid Image1200 manual If the flash or focus is not correct, Using Self-timer