ENGLISH
21
Chapter 3 Using the LCD TV
Chapter 3 USING THE FEATURES
Tuning in the TV channels
After connecting an aerial to your LCD TV and connec ting the mains cable to the T V and
230VAC mains socket, turn the POWER SWITCH of rear TV on, a red light w ill show on the
front centre panel of the TV.
Press the POWER button, the red light will change to gree n and the First Time Insta llation
screen will show:
1. Make sure an aerial is  tted then press OK button on the remote to start the Auto
Programme Scan (APS).
2.In a short while you will see the TV progr ammes brie y as each channel is received and
stored in the memory. When APS is completed BBC1 digit al TV will show, press CH+/-
buttons to view the other channels stored.When  nished ATV scan.TV will Auto chang e to DTV
do the  rst installation channel. To view analogue TV press INPUT button a nd
use the up / down arrow buttons to select TV and t hen Press the OK button.Chan ge
channels by pressing the CH +/- buttons.
To power o press the POWER button, the green light will change to red.
Selecting a INPUT
Press the INPUT button to display the function required (TV/AV).Using the arrow buttons
on the remote highlight the function required and press the OK button to select the function.
Select TV Channel
Press the CH.+/- button on the remote control and the CH.+/-button on the LCD TV to ch ange
the TV channels.
You can directly select the TV channel required by pressing 1,2 or 3 etc on the remote
button pad.
Adjusting the Volume
Press the VOL. +/– button on the remote control or the VOL. +/- but ton on the LCD TV to adjust
the volume.
To Mute the Sound
Press MUTE and the sound cuts o .
To turn mute o , press the MUTE button again, or simply press the VOL +/- button.
Sleep Timer
Press the SLEEP button continuously to select the sle ep timer or turn the sleep tim er from the
OFF,15,30,60minutes; when the LCD TV has reached the set time, it will automatic ally turn o . If
the TV has no input signal, it will automatically p ower down to standby after 15 minutes .