Remote Control

Preparation of Remote Control

Follow the steps below to install the battery.

1.Pull the battery holder out from the remote control in the direction of the arrow.

2.Load a new battery properly with the (+) sided up.

3.Insert the battery holder back into the remote control.

Battery type: CR2025 3V

Battery service life: approximately 1 year under normal use (at room temperature).

Use of Remote Control

Point the remote control unit to the remote sensor within the range of 5 meters and angles of 60 degree, and without obstacles between remote control and remote sensor.

Note

¾Improper use of the battery may cause overheating, explosion or ignition, which can result in an injury or a fire. Battery leakage may damage the remote control.

¾Do not expose the remote control unit to direct sunlight.

¾Do not recharge, disassemble, deform or heat the battery.

¾Do not put the battery in fire or water.

¾Immediately replace the exhausted battery.

¾Take out battery when the remote is not in use for a long time.

15

Page 15
Image 15
Polaroid PDM-8551 user manual Preparation of Remote Control, Use of Remote Control