Remote control
The 740C is supplied with an Azur Navigator remote control that operates both this CD player and other Cambridge Audio Azur amplifiers. Insert the supplied AAA batteries to use.
Note: The remote may be in Amp mode when first activated. Please refer to the Amp Control section for more information.
Standby/On
Switches the unit between On and Standby mode.
Open/Close
Opens and closes the disc tray.
Numerical Track select
Press the number of the desired track. The track will then be played from the start of the track.
Track select
To select a track number greater than ten, press
Bright
Alters the brightness of the display backlight. There are three levels of brightness: Bright, Normal, and Off.
azur 740C
Remote control of matching products
Amp Control mode
The 740A/C remote control comes with an Amplifier Control button, that when pressed, puts the remote into Amp mode, allowing operation of a Cambridge Audio Azur amplifier. When pressed, the LED will light up for 7 seconds (to let you know you are in Amp mode), and will then flash when any of the relevant circled Amp buttons is pressed. All other remote buttons are inactive when in Amp mode.
The functions relevant to the amplifier are as follows:
Standby/On
Switches the amplifier between On and Standby mode.
Numerical buttons
Press to change the input source to the amplifier. Button 6 toggles Tape Monitor on/off.
Mode Mode
Press to switch between Volume and Balance modes.
Mute
Mutes the audio on the amplifier. The mute mode is
ENGLISH
Play / Stop / Pause
Press the relevant button to play, stop or pause the CD.
Skip
Right Skip - Press once to skip forward by one track on the CD. Press and hold to skip forwards through tracks.
Left Skip - Press once to skip backward by one track on the CD. Press and hold to skip backwards through tracks.
Amp Mode Control
Vol
Progindicated by MUTE appearing and the volume level being replaced by two flashing dashes in the display. Press again to cancel mute.
Volume
Increase or decrease the volume of the amplifier output.
Speaker Speaker A/B
A/B
Press to scroll through the speaker sets connected to the loudspeaker terminals on the back panel (speaker sets A, B or A and B).
Search
Press and hold to search within the selected track. Right | Vol | ||||
|
|
|
|
| |
button to fast forward, left button to rewind. |
|
|
|
|
|
Menu Menu |
|
|
|
|
|
|
|
|
|
| |
Press to access the 740C menu system on the front panel |
|
|
|
|
|
display. Please refer to the ‘CD player setup’ section of |
|
|
|
|
|
this manual for more information. | Menu |
|
|
|
|
|
|
Bright
Adjust the backlight of the front panel display; bright, dim or off.
To exit Amp mode (and return to CD mode), press the Amp Control button again (the LED will light up for one second).
Select
Select Select
Press to accept the item/function highlighted in the display menu. Please refer to the ‘CD player setup’ section of this manual for more information.
Program, Remain,
Read the ‘Operating instructions’ section of this manual for information on the functions of these buttons.
Repeat A - B Remain
Intro Random Space
Speaker
A/B
iPodTM compatibility
The 740A/C remote can also control the basic functions of Apple iPod’s when mounted in Apple’s Universal Dock (or other docks compatible with the Apple Remote). Refer to your dock’s instruction manual on how to connect it to your amplifier. To use the Azur remote to control the docked iPod, put the remote into Amp mode and press one of the following buttons:
Play/Pause
Press to play the iPod, press again to pause play.
Skip
Press once to skip forwards or backwards one track.
Menu
Press to return to the iPod main menu.
7