Power Supply
Preparation
Using the AC Adapter
The player is supplied with an AC adapter for powering the unit and charging the battery.
1.Connect AC adapter to the right side of the DVD player in the jack marked DC 12V IN, as shown on the right.
2.Plug the power cord into a grounded electrical outlet. The power indicator will turn red.
Note: Turn player's power off before unplugging.
Note: In the case of using the adapter, the LCD screen will be brighter than with the rechargeable battery.
Using of Car Adapter
The player is supplied with a Car Adapter for powering the unit and charging the battery while in a vehicle.
Connect the Car Adapter Power Plug to the unit’s power jack and plug the other end to the vehicle’s 12V accessory/ cigarette socket, as shown on the right figure.
Attention
¾Do not operate the unit or view video software while driving a vehicle.
¾Place the unit in a proper position for viewing.
¾Detach the battery pack when using the AC or car adapter as power source.
¾Disconnect the player from the Car Adapter when starting the vehicle.
20
