Troubleshooting

Symptom

What to check

No TFT LCD display

Make sure the power is on.

 

 

LCD is very bright or dark.

Use the BRIGHT +/- on the control panel to

adjust the brightness.

 

Colors of picture are faded or

Use the COLOR +/- on the control panel to

bloomy.

adjust the color.

 

Make sure a disc is loaded.

 

Make sure the disc isn’t loaded upside down.

 

Disc should be clean, not dirty or warped.

The player does not play discs

Player’s region code should be the same as

or the display shows: no disc.

region code of DVD disc.

 

Has water condensation occurred?

 

If it has, remove the disc. Keep the disc and

 

the player powered up for about one hour.

 

Make sure the volume is not set to minimum.

No sound.

Make sure the headphone is not connected.

 

Make sure the player is not in pause status.

 

Make sure the player is not in A-B repeat status.

Disc skips and will not continue

Is the disc dirty or warped?

to play.

If so, clean disc or press the GOTO button to

 

skip to next chapter.

 

Make sure there aren’t any obstructions

 

between the remote and the player.

The remote control does not

Make sure you are pointing the remote control at

work.

the player.

 

Make sure batteries are inserted correctly.

 

Replace weak batteries.

Other possibilities

Static or other external interference may cause the player to function abnormally. In this circumstance unplug the power-supply cord from the outlet and plug it in again to reset the player so that normal operation can resume. If you are still having problems, disconnect the power and consult the nearest authorized service center.

32

Page 32
Image 32
Polaroid PDV-0560M manual Troubleshooting, Symptom What to check, Other possibilities: