Troubleshooting

 

Symptom

 

 

 

 

What To Check

 

 

 

 

 

Make

sure the AV IN/OUT switch on the side of the

 

 

 

 

 

player

unit

is in the OUT position for standard play.

 

 

 

 

Make

 

sure

the disc

cover is closed.

 

 

 

 

 

Make

 

sure

a disc

is

loaded.

 

 

 

 

 

 

Make

sure the disc isn’t loaded upside down.

The player cannot play.

Disc

should be clean, not dirty or warped.

 

 

 

 

Player’s region code should be the same as region code

 

 

 

 

 

of DVD disc.

 

 

 

 

 

 

 

 

Has water condensation has occurred? If it has, remove

 

 

 

 

 

the disc and keep the player powered up for at least

 

 

 

 

 

two hours.

 

 

 

 

 

 

 

 

 

Make

 

sure

system connection

is correct.

There

is

no

sound.

Make

sure the speakers are turned on.

 

Make

 

sure

the sound setup of

DVD

disc is correct.

 

 

 

 

 

 

 

 

 

If the

 

disc

is dirty

or

warped?

Clean

or replace disc.

 

 

 

 

 

 

There

is

no

picture.

Make

TV is turned on and in correct video mode.

 

Make

sure your system connection is correct.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Poor

AV

performance.

If the

 

disc

is dirty

or

warped?

Clean

or replace disc.

Cannot continue to play and play

Make

sure the player is not in A-B repeat status.

 

Press

A-B

button

to

cancel it

A-B repeat status.

a section

repeatedly.

 

If the

 

disc

is dirty

or

warped?

Clean

or replace disc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Make

sure there aren’t any obstructions between the

 

 

 

 

 

remote control and the player.

 

 

The remote control does not work.

Make sure you are pointing the remote control at the

 

player.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Make sure batteries are inserted correctly (check polarity).

 

 

 

 

 

Replace weak batteries.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING: Do not touch any metal objects to the battery connectors, as it will put the battery in standby mode. To get out of standby mode please connect the battery and portable DVD player to AC or DC power.

Other possibilities:

Static or other external interfere may cause the player to function abnormally. In this circumstance unplug the power-supply cord from the outlet and plug it in again to reset the player so that normal operation can resume. If you are still having problems, then please disconnect the power and consult your service center or a qualified technician.

- 29 -

Page 29
Image 29
Polaroid PDV-0823A operation manual Troubleshooting, Symptom What To Check