Memorizing the Channels
This unit can automatically find all channels available through antenna or cable inputs, and store them in memory. Note: Be sure to select the TV source before operation.
Selecting the Tuning Band
Before your TV can memorize the available channels, you must specify the type of signal source that is connected to the unit. (i.e., an antenna or cable system)
1
2
3
4
5
Press MENU to display the menu main page.
Press or repeatedly to select Setup menu.
Press OK or to access the submenu.
Press or to select Tuning Band item.
Press OK or to select the Tuning Band.
Air, Cable, Cable HRC, Cable IRC and Cable Auto
If using antenna, select Air;
Video
Audio
Setup
Feature
can be selected.
Tuning Band | Air |
DTV Signal |
|
Auto Ch Search |
|
Manual Ch Set |
|
Channel Labels |
|
To Move OK To Select Exit To Exit
If using cable, select one of Cable/Cable HRC/Cable IRC/Cable Auto according to your local area’s cable system. Normally please select Cable Auto. (For further band information, contact your cable service provider.)
Auto Channel Search
1Navigate to the Setup
2Press OK orto begin the auto channel search.
The unit will automatically search for all available TV/DTV (if using antenna), CATV/CADTV (if using cable) program.
Video
Audio
Setup
Feature
Tuning Band | Air |
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
To Move OK To Select Exit To Exit
Note: if you want to stop the
Manual Channel Set
After setting channels into memory, you can add or delete channels from the default channel list as follows:
1Navigate to the Setup
2Press OK or to open Manual Channel Set Menu sub-menu.
3Use navigation buttons (,,or) to navigate and select, use OK button to add (the added channel will have a mark) or delete the channel. (If you want to toggle between NTSC and ATSC, use navigation buttons to highlight it, and then use OK to toggle.)
Autoprogram Menu
NTSC Channel 12 | Found |
| |
Channels Found | 3 |
| |
Progress (%) | 7 |
| |
|
|
|
|
| Tuning Band | Air |
|
Video | DTV Signal |
|
|
| Auto Ch Search |
| |
Audio | Manual Ch Set |
| |
| Channel Labels |
| |
Setup |
|
|
|
Feature | To Move OK To Select Exit To Exit |
| |
|
|
| |
|
|
|
|
4Press EXIT button to exit.
Now when you use CH+/- buttons to cycle among the channels, the deleted channels can not be selected.
Note:
For DTV program, you can only delete the programs from the list, you can not add it.
You can make use of Manual Channel Set Menu to know whether an ATSC channel exists as a sub channel.
Use OK button to toggle between NTSC and ATSC after highlighted.
Manual Channel Set Menu
Tuning Band |
|
|
|
|
|
| NTSC |
| |
31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 |
41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 |
51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 |
|
| To Move | OK To Select Exit To Exit |
| |||||
18
