Polaroid TTM-2401 manual Antenna connection, Cable TV Catv Connection

Antenna connection

CABLE TV (CATV) CONNECTION

A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal.

Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.

This converter/descrambler is necessary for normal viewing of the scrambled channels. For more specific instructions on installing cable TV, consult your cable TV company. One way to utilize the converter/descrambler provided by your cable TV company is explained below. Please note: An RF switch provided with two inputs (A and B) is required (not supplied).

	RF switch (not supplied)
	OUT	IN
RF	Cable TV converter/
TV REAR	descrambler
	(not supplied)

Two-set
signal
splitter	Cable TV Line
(not
supplied)

"A" position on the RF switch (not supplied) : You can view all unscrambled channels by using the TV's channel keys.

"B" position on the RF switch (not supplied) : You can view the scrambled channels via the converter/descrambler by using the converter's channel keys.

Note: Consult your Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.

ANTENNAS

The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various antenna systems.

1.A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied).

2.A 300-ohm system is a flat "twin-lead" cable that can be attached to a 75-ohm terminal through a 300-75-ohm adapter (not supplied).

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

OUTDOOR ANTENNA CONNECTION

Use one of the following two diagrams if you connect an outdoor

A. Combination VHF/UHF Antenna

antenna.

VHF/UHF

A: Using a VHF/UHF combination outdoor antenna.antenna

B: Using separate VHF and/or UHF outdoor antennas.

Connect the outdoor antenna cable lead-in to the ANT. terminal on the rear of the TV set.

TV REAR

300/75-ohm

adapter

(not supplied)

300-ohm

twin-lead

VHF/UHF antenna

or

75-ohm coaxial cable

Antenna cable

RF

B.Separate VHF and/or UHF Antennas

UHF

antenna VHF antenna

300-ohm twin-lead

Combiner

(not supplied) 300-ohm twin-lead

OUT IN

75-ohmor coaxial cable

6