Polaroid TTM-2401 manual Channel selection, Use Direct Channel Select buttons, To scan programs

Channel selection

TV/AV

STEREO

1 2 3

CCD

4 5 6

DSP

7 8 9

MUTE

0

SCAN P

CH+

Direct channel select buttons

DSP

CH+

You can select desired TV programs by one of the following methods.

Use Direct Channel Select buttons

￿AIR Mode Direct Channel Selection

When the Signal Input menu option in Search menu is in the Air position, all channels can be selected by directly entering the channel number.

￿CATV Mode Direct Channel Selection

When the Signal Input menu option in Search menu is in the CATV position, channels can be selected as follows:

Method 1:

Directly enter the channel number and wait for a few moments.

Method 2:

1-9: Press “0” twice, then 1-9 as needed. For example, to select channel 2, press “002”.

10-99: Press “0”, then the remaining 2 digits. For example, to select channel 12, press “012”.

100-125: Press the 3 digits in order. For example, to select channel 120, press “120”.

Use Channel up/down buttons

V- MENU V+

CH-

Press CH+ button, the channel number increases;

Press CH- button, the channel number decreases.

CH-

Use previous channel button

Press button to switch between the current channel and the previous one.

Notes:

Use DSP button to know the current channel number

Press DSP button to display the	12 ST SAP
current state of the TV. If the TV is
in program viewing mode, it will
display the current channel
n u m b e r, s o u n d m o d e a n d
remaining sleep time (if set).	Sleep 22

To scan programs

Press SCAN button and the TV will scan the channels from the current channel to higher channels one by one. Every program will be displayed for about one second and then the TV will continue scanning.

Press SCAN button again and the TV will stop at the displayed program.

14