Polk Audio FX LSi SERIES FROM POLK AUDIO, Placement Recommendations, Processor Mode Configuration

LSi SERIES FROM POLK AUDIO

The LSi Series from Polk Audio is the ultimate expression of the performance principles that have made Polk Audio a world leader in loudspeaker technology. The LSi Series features patented Polk Audio technologies reengineered for the new millennium. From reformulated Dynamic Balance cones, to ring radiator tweeters, the LSi Series is for serious listening. Advancements in sound technology, including SACD and DVD Audio, come to life with higher accuracy and resolution, more dynamic response and superb focus. LSi Series Center Channel Loudspeakers deliver three-dimensional imaging and superb off-axis clarity. LSi Series Surround FX Loudspeakers perfectly complement your LSi home theater system, offering both Bipole and Dipole options to suit your placement needs. Hear what you’ve been missing: the Polk Audio LSi Series.

PLACEMENT RECOMMENDATIONS

FOR THE LSi SERIES CENTER CHANNEL LOUDSPEAKER

The LSi Series Center Channel Loudspeaker incorporates the most effective magnetic shielding available so it can be placed safely on or near your TV or video monitor. If you notice video distortion or discoloration, immediately move the speaker away from the TV and call Polk Audio Customer Service 800-377-7655 (US or Canada) or polkcs@polkaudio.com. The most popular placement for a center channel speaker is on top of your TV, anchoring the dialogue and effects to the screen [figure 1]. An alternate placement is on a shelf below your TV [figure 1]. If you are using a front projection TV system, place the center channel speaker on a small stand or table immediately below the bottom of the projection screen, or at ear level behind the screen if your screen is acoustically transparent. Consult the owner’s manual for your screen. Adhesive rubber feet are included with your LSi C Center Channel Loudspeaker and may be attached to the bottom of the speaker to protect your furniture and keep the speaker in place.

PROCESSOR MODE CONFIGURATION

FOR THE LSi SERIES CENTER CHANNEL LOUDSPEAKER

The “bass management” or “speaker configuration” menus of most surround receivers offer the choice of “normal” or “wide” modes for center channel operation. In discrete channel digital processors these modes are referred to as “small” and “large.” Normal (small) mode filters bass frequencies from the center channel speaker and sends them instead to the front left & right main speakers or to the subwoofer output (LFE) jack. Wide (large) mode sends an unfiltered, full range signal to the center channel speaker. Use the Small (normal) mode for optimum center (and surround) channel performance and reliability.

FOR MORE INFORMATION ON BASS MANAGEMENT SETTINGS, VISIT

http://www.polkaudio.com/home/faqad/advice/processor.html

PLACEMENT AND BI-POLE/DI-POLE OPERATION

OF LSi SERIES SURROUND FX LOUDSPEAKERS

The LSi Series Surround FX Loudspeakers were designed to provide the ultimate diffuse sound field experience in your home theater system. One LSi FX speaker is the “left” channel speaker, and the other is the “right” channel speaker. The serial number label identifies which speaker is which [figure 2]. The “left” surround speaker should be placed on the left side of the room as you face the front of the room. The type of surround processor you use will influence your placement and bi-pole/di-pole switching choices [figure 2]. Experiment to find the right balance of sound quality and room integration:

Direct surround effects—bi-pole mode [figure 3a & 3b]: If you plan on placing the speakers more than one foot (30cm) behind the primary listening position we recommend using the “bipole” switch setting [figure 2] and placement.

Contact Polk Audio Customer Ser vice 1 - 800 - 377 - 7655 (Outside US: 410 - 358 - 3600), polkcs@polkaudio . com