SoundStation VTX1000 Conference Phone Controls If you have a QSX connected to a VTX1000 conference phone, you can use the phones
controls as shown below:
Note: If your QSX system is connected to both a content controller and a SoundStation
VTX 1000 phone, you can use either device to control meeting content and access the
Info screen.
Note: Unless you have configured the QSX for a specific password, a new password will
be generated each time the VTX 1000 phone is placed on-hook (i.e.- hung up).
Manual IP Dialing
You can manually dial the IP address of a remote QSX or Polycom MGC bridge using
the keypad on your VTX 1000.
Note: In this scenario, the VTX 1000 is serving as a dial pad for one QSX dialing another
one.
In order to do so, follow these steps:
1. Make a voice call by dialing the phone number using the VTX 1000 dial pad.
2. To dial a device with an IP Address and Password, dial the following sequence:
Dial sequence: #*<IP>#[password]#
Example: #*172*43*16*213#1234#
12