Polycom DOC2557A Connecting Cables on the RMX, First-time Power-up, For the RTM ISDN 1500 module

Chapter 1-Hardware Description

Connecting Cables on the RMX 1500

To connect the cables:

•For the RTM-IP 1500 module:

—Connect the Media cable to LAN 2 port.

—Connect the Network cables to the MNG (Signaling) port & MNGB (Management Network) port.

—(Optional) Connect the Shelf Management cable to the Shelf port.

•For the RTM ISDN 1500 module:

—Connect the E1/T1 cables to their PRI (1-4) ports.

Power Cable	E1/T1 PRI	LAN 2; media, MNG; signaling,
	Connection(s)	MNGB; management & Shelf

Figure 1-1RMX 1500 Rear Panel View with AC Power and Communication

Cables

The LAN 1, LAN3, LAN4 and Modem ports are not be used and the plastic caps covering those ports should not be removed.

First-time Power-up

1For first entry installation, you must insert the USB key containing the modified IP addresses in USB slot on the RMX’s front panel. For more information see, the RMX 1500/2000/4000 Getting Started Guide, "Procedure 1: First-timePower-up”on page 2-19.

2Turn ON the power by pressing on the power switch located on the front panel of the RMX 1500.

1-8