Chapter 2- Component Installation & Replacement
Installing the RTM ISDN 1500 Card
Prior to adding the RTM ISDN 1500 card you must have your ISDN product license available. For more information see, RMX 1500/2000/ Getting Started Guide, "Procedure 2: Product Registration” on page
1Ensure that the power switch on the RMX 1500 is turned OFF (O).
2Loosen the captive screws that fasten the card to the MCU.
3Slide in the RTM ISDN 1500 card.
4Insert the card into the slot and tighten the captive screws on each side of the rear panel of the card, securing the RTM ISDN card to RMX.