Polycom DOC2557C manual Connecting the RMX 1500 to a Power Source, Using a shelf, 1-10

Chapter 1-Hardware Description

•Using a shelf

—Install the shelf supplied by the rack manufacturer, in the rack.

—Mount the RMX on the shelf.

—Fasten the RMX to the rack with screws through the four holes in the RMX’s front mounting brackets.

Connecting the RMX 1500 to a Power Source

The following restrictions apply to the conductors and connectors that may be used to ground the unit when rack mounted:

•When using bare conductors, they must be coated with an appropriate antioxidant compound before crimp connections are made. Tinned, solder-plated or silver-plated connectors do not have to be prepared in this manner.

•The same bolt assemblies should not secure multiple connectors.

•Listed fastening hardware must be compatible with the materials being joined and must be preclude loosening, deterioration and electrochemical corrosion of the hardware and joint materials.

1-10