13In the Fast Configuration Wizard - SIP dialog box, enter the following information:

Field

Description

 

 

SIP Server

Select:

 

Specify – to manually configure SIP servers.

 

Off – if SIP servers are not present in the network.

 

 

SIP Server IP

Enter either the IP address of the preferred SIP server

Address

or its host name (if a DNS server is used).

 

 

Transport Type

Select the protocol that is used for signaling between

 

the MCU and the SIP Server or the endpoints

 

according to the protocol supported by the SIP Server:

 

UDP – Select this option to use UDP for signaling.

 

TCP – Select this option to use TCP for signaling.

 

TLS – The Signaling Host listens on secured port

 

5061 only and all outgoing connections are

 

established on secured connections. Calls from SIP

 

clients or servers to non secured ports are rejected.

 

The supported security protocols are: TLS 1.0, SSL

 

2.0 and SSL 3.0.

 

 

14Click the Next button.

15Enter the required Security information in the dialog box.

Field

Description

 

 

Authentication

Enter the conference, Entry Queue or Meeting Room

User Name

name as registered with the proxy.

 

This field can contain up to 20 ASCII characters.

 

 

Authentication

Enter the conference, Entry Queue or Meeting Room

Password

password as defined in the proxy.

 

This field can contain up to 20 ASCII characters.

 

 

9

Page 9
Image 9
Polycom DOC2562A manual Field Description