2
Preparations
Obtain the following information from your network administrator:
• IP addresses, Subnet Mask and Default Gateway IP address
(optional) for the RMX control unit and RMX Shelf Management.
• IP addresses for the RMX Signaling Host and Media cards.
• Gatekeeper IP address.
• SIP server IP address, if applicable.
If ISDN/PSTN is installed in your conferencing environment, obtain the
following information from your ISDN/PSTN Service Provider:
• Switch Type, Line Coding and Framing, Numbering Plan and
Numbering Type.
• Dial-in number range.
Unpacking the RMX
1When you receive the RMX packing case, inspect the equipment for
damage and verify that the components match the packing slip.
2The RMX is shipped in a packing case with Stratocell® packaging,
and the top cover must be unlocked and lifted.
3Remove the boxes that are placed on the top Stratocell® and the top
Stratocell® and open the anti-static plastic bag wrapping the RMX.
4Holding the handle on each side, lift the RMX from the box, and
place it on a flat surface or in a rack. Remove any packaging
material prior to positioning the RMX.
If the RMX is connected to the public ISDN Network, an external
CSU or similar equipment is needed.
Attention:
Two people are required to lift the MCU out of the box and when
installing it in a rack.
Write down the RMX’s serial number that is on a sticker on the back
of the unit. It will be needed for product registration later in the
installation process.