Polycom Using SoundPoint IP 300 SIP, Placing a Call, Using the Handset, Using Listen Mode

Using SoundPoint® IP 300 SIP

Placing a Call

Using the Handset:

1.To obtain dial tone, pick up the handset.

2.Dial the desired number,

OR

Dial by SIP URL or IP† address:

•After obtaining dial tone press Name

•Enter URL or IP (press * for “.” and # for “@”)

•Press Send to complete the call.

Using Listen Mode:

During a call, users can alternate between handset or headset modes

by pressing thekey.

1. With the handset on-hook, press Menu , and choose Call Features,

followed by Listen Mode.

2.Dial the desired number,

OR

Dial by SIP URL or IP† address as above.

Using the Headset:

1. With the optional headset connected,

press a line key, , or NewCall to obtain dial tone.

2.Dial the desired number,

OR

Dial by SIP URL or IP† address as above.

Listen Mode can be used for listening to a conference call but not actively participating, or for checking voice mail.

See also Headset Memory Mode.

Users also have the option to dial directly from the dial pad without first getting dialtone. Simply enter the number then lift the handset or press the Dial soft key or press thekey.

In all cases, the active call will appear on the display showing call duration and destination.

†Examples: 10.3.0.42	To obtain the IP address of your telephone,
joe@205.173.1.24	press	Menu followed by System Status and
sip: jane@polycom.com	General. The IP address is listed together with
	other network information.

6