Manuals / Polycom / Computer Equipment / Server

Polycom manual Installing the KWS8000 on a Wall, Wall Mounting Safety Precautions

Models: KWS8000

1 38

Download 38 pages 61.5 Kb

Page 8

Installing the KWS8000 on a Wall

KWS8000 Installation

2Before placing the unit, carefully turn it upside down and mount the four rubber pads supplied in the package. One must be placed at each corner of the bottom plate.

3Place it on a clean, flat, horizontal surface.

Installing the KWS8000 on a Wall

Before you start installation take notice of the following safety precautions.

Wall Mounting Safety Precautions

•Ensure the wall quality is good enough for holding the unit. Avoid high-porous surfaces, joints and similar.

•Never use countersunk screws.

•Leave at least 10 centimeter of free air above the unit for ventilation.

To Install the KWS8000 Using the Wall Hanger

For free hanging installations, you use the wall hanger.

1Find a suitable spot on an even closed-textured surface. The unit should be placed minimum 1 meter above ground surface and minimum 20 centimeter from any corner.

Figure 1-2Wall hanger positioning

1–5

Image 8

Polycom manual Installing the KWS8000 on a Wall, Wall Mounting Safety Precautions

Contents

Polycom KIRK Wireless Server Installation Guide Proprietary and Confidential Contents KWS8000 InstallationReplacing Components Regulatory NoticesSpecifications KWS8000 InstallationInstalling the KWS8000 General Mounting Safety Precautions General Installation InformationInstalling the KWS8000 in a Rack Rack mounting Safety Precautions Installing the KWS 8000 on a Flat Surface Flat Surface Mounting Safety PrecautionsInstalling the KWS8000 on a Wall Wall Mounting Safety PrecautionsConnecting the KWS8000 Cables Cable Safety PrecautionsTo Connect Power Cables Figure 1-4 KWS 8000 Power plugs1 Plug a suitable power cord into the AC power adapter Installing Interface Cards and CPU Cards Safety PrecautionsTo Install CPU Cards Figure 1-6 Installing Interface cardsConnecting Interface Cables 1-12 Polycom KIRK Wireless Server 8000 Installation GuideFigure 1-8 Harnessing cables to the back and out Figure 1-9 Harnessing cables to the side and out Component Replacement Replacing ComponentsComponent Replacement Precautions Replacing Interface and CPU cardsReplacing the Backplane Regulatory Notices International Regulatory and Product InformationUnited States Safety Construction Details CE Mark R&TTE DirectiveCanadian Department of Communications Important Safety Instructions and Product Information Intrinsic safety Spare parts and accessoriesExposure to sunlight, heat and moisture RF compliance informationPolycom Product Warranty Statement Unauthorized product modification or alteration 1. GRANT OF LICENSE IMPORTANT - READ CAREFULLY BEFORE USING THE SOFTWARE PRODUCTEND-USER LICENSE AGREEMENT FOR POLYCOM SOFTWARE 2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS 3. SUPPORT SERVICES 5. UPGRADES6. WARRANTY AND WARRANTY EXCLUSIONS 4. TERMINATION7. LIMITATION OF LIABILITY 10. MISCELLANEOUS 8. DISCLAIMER9. EXPORT CONTROLS Page Tables KWS 8000 Installation and Configuration GuideFigures Figure 1-1 Rack Installation Figure 1-2 Wall hanger positioningFigure 1-4 KWS 8000 Power plugs Figure 1-5 Storing room for two AC power adaptersIndex RJ45 Wiring WiringConnector ConnectorPage 14184630, Hd.1. Rasmussens Bogtrykkeri, Ringkøbing