Restoring Default Flash Timing
Enter the System Settings Directory then scroll ▼ until you see EDITFLASH TIME? Press SELECT. Scroll ▲ until you see RESTORE DEFAULT FLASH TIME? Press
SELECT.
Restoring System Factory Default Settings
All factory system settings can be restored at the same time. Make sure you wish to restore ALLfactory system settings before proceeding with this feature.
Enter the System Settings Directory then scroll ▼ until you see RESTORE DEFAULT SYSTEM SETTINGS? Press SELECT the following will appear on the display.
If you are sure you wish to restore all line settings, press SELECT again.
Information Retention During a Power Loss
Soundpoint Pro retains all stored information during loss of power. It is not necessary to reset any programmed or stored parameters.
CAUTION: SoundPoint Pro will not operate without power. See the “Safety Instructions” on Page ii for precautions.
SoundPoint Pro Professional Conference Phone Operation
SOUNDPOINT® PRO TROUBLESHOOTING
Chapter 3
SoundPoint Pro Professional Conference Phone Troubleshooting
