Polycom Pro SE-225 Getting Connected, Line Interface Module LIM, Installing the Phone, Setup

Line Interface Module (LIM)

The Line Interface Module (LIM) provides the convenience of a single cable to your two-line phone, reducing clutter and improving mobility for conferencing. However, if your two lines share the same telephone jack, the phone line and power can be connected directly to the console. See your options in the following section, “Installing the Phone”.

Installing the Phone

Setup 1

See the Quick Guide for detailed installation instructions or follow these steps.

1.Plug one end of either 7’Phone Cord into line port L1 of the LIM and the other end into the wall jack for Line 1.

2.Repeat step 1 for Line 2 using the other 7’Phone Cord.

3.Connect the double-ended console cable from the LIM to the TEL and DC POWER ports on the console.

4.Connect the Power Adapter cord to the LIM and plug the Power Adapter into the electrical outlet.

Setup 2

If two phone lines share one telephone wall jack, install as in Setup 1 but be sure to connect the black 7’Phone Cord provided. Continue with Setup 1, steps 3 and 4.

Setup 3

If two phone lines share one telephone wall jack, the phone can be installed without using the LIM. Connect the black 7’Phone Cord into the TELport on the Console and the Power Adapter to DC POWER.

GETTING CONNECTED

Phone, Power, and Data Connections

SoundPoint Pro Professional Conference Phone Introduction and Installation

1–4

DATA	TEL	DC POWER
Data port allows you to	Connect the RJ11 (Phone)	Connect the power
conveniently connect a Fax	plug from the LIM or	plug from the LIM or
machine or modem to	connect a phone line directly.	connect power directly.

SoundPoint Pro without having to locate another analog phone jack or disconnect SoundPoint Pro.

SoundPoint Pro Professional Conference Phone Introduction and Installation

1–5