VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Installation
Hardware Installation
First, use a screwdriver to loose the three screws and detach the dome cover from the camera base. Then, follow the steps below to install the camera to either a ceiling or a wall.
N.C.
N.C.
N.C.
AC24V
AC24V
Ceiling mount with the bottom base
1.Attach the supplied alignment sticker to the ceiling.
2.Using the 10 circles on the sticker, drill 2 pilot holes symmetrically on each side into the ceil- ing. Then hammer the four supplied plastic anchors into the holes.
3.Through the four holes on the bottom base, insert the four supplied screws into the corre- sponding holes and secure the bottom base with a screwdriver.
4.Feed the cables through hole A or B. If you want to use hole B, remove the rubber stopper with a screwdriver.
5.Secure the camera base to the bottom base with three supplied screws.
A
1
2
4
B | 5 |
|
3
8 - User's Manual