Vivotek FD7141(V) manual Sensor Settings, Advanced Mode

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Sensor Settings

Advanced Mode

Click Sensor Settings to open the Sensor Settings page. On this page, you can set the maximum exposure time, exposure level, and AGC (Auto Gain Control) settings.

You can configure two sets of sensor settings: one for normal situations, the other for special situations, such as day/night/schedule mode.

Sensor Setting 1:

For normal situation

Sensor Setting 2:

For special situation

Maximum Exposure Time: Select a proper maximum exposure time according to the light source of the

surroundings. The exposure times are selectable for the following durations: 1/30 second, 1/15 second, and 1/5 second. Shorter exposure times result in less light.

■Exposure level: You can manually set the Exposure level, which ranges from 1 to 8 (dark to bright).

The default value is 4.

Max gain (Auto Gain Control): You can manually set the AGC level (2X 4X, or 8X). The default value is 4X.

Enable WDR (Wide Dynamic Range): Select this option to enable the WDR function. With WDR, the Network Camera can cope with very challenging lighting conditionsby combining the dark and bright parts of an image to generate a realistic image representative of what is seen with the human eye.

Note: If you select this function, Exposure level and Enable AGC function will be disabled.

You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to enable the settings and click Close to exit the page.

User's Manual - 55