Vivotek FD7141(V) manual Keep current value, Privacy Mask

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

■ Keep current value

Follow the steps below to manually set the white balance to compensate for the ambient lighting conditions.

1.Set the White balance to Auto and click Save.

2.Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color temperature automatically.

3.Select Keep Current Value to confirm the setting while the white balance is being measured.

4.Click Save to enable the new setting.

Image Adjustment

■Brightness: Adjust the image brightness level, which ranges from -5 to +5. The default value is set to 0.

■Saturation: Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0.

■Contrast: Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0.

■Sharpness: Adjust the image sharpness level, which ranges from -3 to +3. The default value is set to +3.

You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to enable the setting and click Close to exit the page.

Privacy Mask

Advanced Mode

Click Privacy Mask to open the settings page. On this page, you can block out sensitive zones to address privacy concerns.

■To set the privacy mask windows, follow the steps below:

1. Click New to add a new window.

2. Use the mouse to size and drag-drop the window, which is recommended to be at least twice the size of the object (height and width) you want to cover.

3. Enter a Window Name and click Save to enable the setting.

4. Select Enable privacy mask to enable this function.

NOTE

►Up to 5 privacy mask windows can be set up on the same screen.

►If you want to delete the privacy mask window, please click the ‘x’ on the upper right-hand corner of the window.

54 - User's Manual