VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Hardware Reset
Reset Button
Status LED
The reset button is used to reset the system or restore the factory default settings. Sometimes resetting the system can return the camera to normal operation. If the system problems remain after rebooting, restore the factory settings and install again.
Reset: Press and release the reset button with a paper clip or thin object. Wait for the Network Camera to reboot.
Restore: Press and hold the reset button until the status LED rapidly blinks red and green simultaneously. Note that all settings will be restored to factory default.
SD Card Capacity
This network camera is compliant with SDHC 16GB / 8GB and other preceding standard SD cards.
User's Manual - 7