Vivotek FD7141(V) manual When using a PoE-enabledswitch, When using a non-PoEswitch

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Internet connection via PPPoE (Point-to-Point over Ethernet)

Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to PPPoE on page 37 for details.

Set up the Network Camera through Power over Ethernet (PoE)

When using a PoE-enabled switch

The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet cable. If your switch/router supports PoE, refer to the following illustration to connect the Network Camera to a PoE-enabled switch/router via an Ethernet cable.

power + data transmission

N.C.

N.C.

N.C.

AC24V

AC24V

PoE Switch

When using a non-PoE switch

If your switch/router does not support PoE, use a PoE power injector (optional) to connect between the Network Camera and a non-PoE switch/router.

N.C.

N.C.

N.C.

AC24V

AC24V

PoE Power Injector

(optional)

Non-PoE Switch

12 - User's Manual