
Using Your Conference Phone in PSTN Mode
31
4After the party answers, press or the Confrnc soft key to activate
another hook flash. All parties join the conference, and the
Active:Conference screen displays, as shown next.
5To add additional parties to the conference, press or the
Confrnc soft key, and then repeat steps 3 and 4.
Holding and Resuming ConferencesWhen you place a conference call on hold, you place the other conference
participants on hold.
To place a conference call on hold:
>> From the Active:Conference screen, press the Hold soft key.
The Hold:Conference screen displays. The other conference participants are
placed on hold. The indicator lights flash red to indicate that a call is on hold.
To resume the conference call, press the Resume soft key. The
To: Active:Conference screen will display again.
Ending ConferencesWhen you end a conference, you end your connection to the other conference
participants. By default, the other parties remain connected.
To end a conference:
>> From the Active:Conference screen, press the End Call soft key.
By default, the conference ends and the other conference participants remain
connected.