Plan the Interface
Function Menu Programming
SpectraLink 6300 MCU
Note that the function menu defaults set for the handsets associated with the SpectraLink 6300 MCU can be changed via the SpectraLink Operator’s Console. If the system uses softkeys, to minimize unwanted interaction between system display and the handset function menu display, configure the handset menu to include a delay of one function key. The user will then have to press FCN twice before the handset menu displays, allowing the first press of the FCN key to access softkey functions. See SpectraLink 6300 MCU: Operator’s Console for further procedural information. Another option may be to disable the softkey menu at the system and exclusively use the SpectraLink menu. This would remove any unwanted interaction, but may restrict the number of available features to the number of programmable keys on the handset.
SpectraLink 6100 MCU
For the SpectraLink 6100 MCU, the handset function menu can only be changed via remote configuration through the services of Polycom Customer Support.
SpectraLink 8000 Telephony Gateways
Menu options can be changed in the Administration Console of the SpectraLink 8000 Telephony Gateways. The Delay function is used when the PBX uses softkeys. With Delay, when the FCN key is pressed, the handset displays the features that are associated with the softkeys so that one of these features can be selected first. If Delay is programmed, pressing the FCN key twice will bring up the menus immediately. Under the menu programming section of the Administration console there is an option to use Delay (same as the SpectraLink 6300 MCU).
See your handset’s Configuration and Administration document for further details. Also refer to the SpectraLink 8000 Telephony Gateway: Administration Guide for SRP document for details on configuring the telephone switch type.
PN: | 11 |
