GETTING STARTED GUIDE FOR THE V500 SYSTEM
Placing and Ending an Audio-only Call
If you have an ISDN line connected to your V500, you can use your system to make
Placing an Audio-only Call
To place an audio-only call from your system:
1.On the Place a Call screen, enter the number you want to call.
To place a call within your PBX system, enter the last four digits of the number.
To delete a digit, press 
Delete on the remote control.
2.Press Call to place the call.
Ending an Audio-only Call
To hang up from an audio-only call:
>>Press 
Hang Up on the remote control.
If the person on the telephone hangs up first, you need to disconnect the call from the
V500 system, just as you would hang up a telephone receiver in a regular phone call.
8 | WWW.POLYCOM.COM/VIDEODOCUMENTATION |
|
