Step 2 – Locate Switch/Router
Find your switch. It will either be a Fortigate (picture A) with a built in switch, or a Cisco switch and router combo (picture B). If there is more than one Cisco switch, then you will be able to identify it because a cable will run from port 1 to a cisco router.
Picture A: Fortinet
Picture B: Cisco
Ports 10 and up should be free
Step 3 – Plug Polycom into Switch/Router
If you have the fortigate unit you want to plug the network cable from the video conference unit into one of the available ports shown below:
If you have the Cisco setup you want to plug the network cable from the video conference unit into one of the available ports numbered from 10 and up (do not unplug any of the ports)
