Polycom VSX 7000s, VSX 5000, VSX 3000 manual Non-Proprietary Security Policy, Version, June 15

Non-Proprietary Security Policy, Version 1.0			June 15, 2007
	FIPS 140-2 Logical Interface	VSX 3000, VSX 5000, and VSX 7000s Port/Interface
	Power	Power connector

The following is the list of ports and interfaces for the VSX 7000e system and Figure 8 below shows the ports on module’s back panel.

∙Network interface bay – For network interface module (for BRI, PRI, and V.35/RS-449/RS-530 connection)

∙VCR/DVD connector – Play VCR/DVD content into calls or rec ord the calls to VCR/DVD

∙Audio connector – Input to system from ImageShare II and computer, or outputs to external speaker

∙Serial ports – RS-232 port for touch panel, camera control, or other RS-232 devices

∙S-Video connector – Input to system from camera or outpu t for S-Video monitor

∙Analog phone connector – For analog phone line

∙Camera 1 control connector – For camera 1 PTZ control

∙VGA connector – Input to system for ImageShare II and compu ter VGA, or outputs to VGA monitor and projector

∙LAN connector – For IP calls, VSX Web, and remote management

∙Conference link connector – For microphone pod, SoundStatio n VTX 1000, or Visual Concert VSX

∙IR Sensor – Input from IR sensor

∙Power button – Controls power and provides system st atus

∙LED – LEDs indicate system status

∙Power connector – For power cord

Polycom VSX 3000, VSX 5000, and VSX 7000s Page 11 of 23

© 2007 Polycom, Inc. - This document may be freely reproduced and distributed whole and intact including this Copyright Notice.