Polycom VSX 3000, VSX 7000s manual VSX 5000 Back Panel

Non-Proprietary Security Policy, Version 1.0 June 15, 2007

∙LAN connector – For IP calls, VSX Web, and remote management

∙Conference link connector – For microphone pod, SoundStatio n VTX 1000, or Visual Concert VSX

∙VGA connector – VGA connector for input and passes the v ideo image for monitor or projector

∙VCR/DVD inputs – For VCR/DVD to play content into calls

∙Power switch – To power up or down the device

∙Audio connectors – For main monitor audio, or for external speaker system

∙S-Video Connector – S-Video output for monitor

∙Serial port – RS-232 port for RS-232 device

∙IR Sensor – Input from IR sensor

∙Speaker – Built-in speaker

∙Camera – Input for video conferencing

∙LED – LEDs indicate system status

Figure 7 - VSX 5000 Back Panel

Section 1 of the Administrator’s Guide for the VSX Series lists the connection cables required for the system. The Following table maps VSX 5000 interfaces with FIPS 140-2 logical interfaces.

Table 3 - Mapping of FIPS 140-2 Logical Interfaces to VSX 5000 Interfaces

	FIPS 140-2 Logical Interface	VSX 3000, VSX 5000, and VSX 7000s Port/Interface
	Data Input	LAN connector, VGA connector, VCR/DVD inputs, Conference link
		connector, Serial Port, Camera
	Data Output	LAN connector, VGA connector, Audio connectors, S-Video Connector, Serial
		Port, Conference link connector, Speaker
	Control Input	Conference link connector, LAN connector, Serial Port, IR Sensor, Power
		switch
	Status Output	VGA connector, S-Video connector, LAN connector, Serial Port, Conference
		link connector, LEDs
Polycom VSX 3000, VSX 5000, and VSX 7000s			Page 10 of 23

© 2007 Polycom, Inc. - This document may be freely reproduced and distributed whole and intact including this Copyright Notice.