Software installation
5.In the next dialog box, the search for the driver is carried out. The standard command "Floppy disk drive" appears. Click on "Next".
6.The driver is then loaded from the disk. Click on "Next" to install the driver. Click "Finish" to complete the installation.
7.At the end of the installation procedure, a new icon for your PORT DVD will appear with a new drive letter in the folder "My Computer".
Windows 95b
1.Insert the PORT DVD disk containing the Windows 95/98 software.
2.Plug the PCMCIA Cable into any PCMCIA slot of your computer.
3.The window "Updated Device Driver Wizard" appears. Confirm by pressing the button "Next".
4.Start the copy procedure by clicking "Finish". If prompted, insert the disk, click "OK", and then type "A:\" in the space provided and click "OK" again.
5.Click on "Yes" to restart the computer.
6.The folder "My Computer" will now have an icon for your PORT DVD device.
Windows 95a
1.Insert the PORT DVD disk containing the Windows 95/98 software.
2.Plug the PCMCIA Cable into any PCMCIA slot of your computer and continue with "OK".
3.Afterthedialogbox"NewHardwareFound"appears,clicktheoption"Driver from disk provided by hardware manufacturer".
4.Confirm the next window "Install from Disk" by clicking the button "OK".
5.Themessage"Insertdisk"mayappearpromptingyoutoinsertthePORTDVD installation disc Windows 95/98. Make sure that the disk is in the drive and confirm by clicking "OK".
6.Another window "Copying files" shows you from which path the installation is to be performed. Type into the input box "A:\", whether it is empty or contains another entry and then confirm by clicking "OK".
7.The copy procedure begins and you will be continuously informed about the installation status.
8.At the end of the installation procedure, a new icon for your PORT DVD drive will appear with a new drive letter in the folder "My Computer".
Note: Before you can start the setup program, you must have carried out the “Software Installation for Windows 95/98” in point 3.1.
9
