Porter-Cable 100H instruction manual Porter-Cable Corporation, Highway 45 North, Jackson, TN

907395 - 12-20-02.qxd 12/20/02 9:13 AM Page 5

10.AVOID “CLIMB-CUTTING”.(See section “USING THE TOOL” in this manual). “Climb-cutting” increases the chance for loss of control resulting in possible personal injury.

11.DO NOT HAND-HOLD THE ROUTER IN AN UPSIDE-DOWN OR HORIZONTAL POSITION. The motor can separate from the base if not properly attached according to the instructions (See “ATTACHING THE MOTOR TO THE ROUTER”) section.

12.SOME WOOD CONTAINS PRESERVATIVES WHICH CAN BE TOXIC. Take extra care to prevent inhalation and skin contact when working with these materials. Request, and follow, any safety information available from your material supplier.

13.There are certain applications for which this tool was designed. Porter- Cable strongly recommends that this tool NOT be modified and/or used for any application other than that for which it was designed. If you have questions relative to its application, DO NOT use the tool until you have written Porter-Cable and we have advised you.

	Technical Service Manager
	Porter-Cable Corporation
	4825 Highway 45 North
	Jackson, TN 38305
SYMBOL	DEFINITION
V	........................ volts
A	........................ amperes
Hz	........................ hertz
W	........................ watts
kW	........................ kilowatts
µF	........................ microfarads
l	........................ liters
kg	........................ kilograms
N/cm2	........................ newtons per square centimeter
Pa	........................ pascals
h	........................ hours
min	........................ minutes
s	........................ seconds
	........................ alternating current
3	........................ three-phase alternating current
3N	........................ three-phase alternating current with neutral
	........................ direct current
n0	........................ no load
	........................ alternating or direct current
	........................ Class II Construction
	........................ splash-proof construction
	........................ watertight construction
…/min	........................ revolutions or reciprocation per minute

5