A
A
Fig. 3 | Fig. 4 |
3, counterclockwise (as viewed from the front of the saw).
4.Insert the blade into the clamp until it bottoms. Allow the release collar to rotate clockwise to lock the blade in place, (A) Fig. 4.
5.To remove blade: repeat steps 1 through 3, and pull blade from blade clamp (while the release collar is being held in the open position).
NEVER TOUCH BLADE IMMEDIATELY AFTER USE, AS IT MAY BE EXTREMELY HOT.
NOTES: If the blade clamp collar resists rotation to remove a blade, work the blade up and down while rotating the clamp (in a counter- clockwise direction).
If the blade breaks leaving nothing to grasp (to pull it from the
clamp), it may be necessary to | FLUSH | RECESSED | |
use another blade as a tool to aid | |||
BREAK | BREAK | ||
in removing the broken piece (see | BROKEN | BROKEN | |
Fig. 5). While holding the release | BLADE | BLADE | |
| |||
collar in the open position, use |
|
| |
the tip of another blade to ÒhookÓ |
|
| |
the broken piece and pull it from |
|
| |
the clamp. (A thin, |
|
| |
|
| ||
P e r i o d i c a l l y c l e a n t h e b l a d e |
|
| |
c l a m p w i t h d r y c o m p re s s e d |
| Fig. 5 | |
air. DO NOT lubricate the blade |
|
|
clamp. Lubricant can attract contamination.
W E A R A N S I Z 8 7 . 1 S A F E T Y G L A S S E S W H I L E U S I N G COMPRESSED AIR.
HANDLE FEATURES
The Model 741 is supplied with a soft grip handle.
10
