Porter-Cable CLFRP350 instruction manual Pressure reading

PROBLEM	CAUSE	CORRECTION
Pressure reading	It is normal for "some"	If there is an excessive amount
on the regulated	pressure drop to occur.	of pressure drop when the
pressure gauge		accessory is used, adjust the
		regulator as instructed in the
(if equipped)
		Operation section.
drops when an
		NOTE: Adjust the regulated
accessory is
		pressure under flow conditions
used.
		(while accessory is being
		used).
Air leak from	Possible defect in safety	Operate safety valve manually
safety valve.	valve.	by pulling on ring. If valve still
		leaks, it should be replaced.
Compressor is	Possible defect in safety	Operate safety valve manually
not supplying	valve.	by pulling on ring. If valve still
enough air		leaks, it should be replaced.
to operate	Prolonged excessive use	Decrease amount of air usage.
accessories.	of air.
	Compressor is not large	Check the accessory air
	enough for air requirement.	requirement. If it is higher than
		the SCFM or pressure supplied
		by your air compressor, you
		need a larger compressor.
		Check and replace if required.
	Hole in hose.	Check and replace if required.
	Check valve restricted.	Remove and clean, or replace.
		Refer to the "To Replace or
		Clean Check Valve" in the
		"Service and Adjustment"
		section.
	Air leaks.	Tighten fittings.
	Restricted air intake filter	Clean or replace air intake
		filter. Do not operate the
		air compressor with the
		filter removed. Refer to the
		"Air Filter" paragraph in the
		"Maintenance" section.
Restricted air	Dirty air filter.	Clean or replace. See "Air
intake		Filter" paragraph in the
		"Maintenance" section.
Regulator knob	Damaged regulator	Have checked by a Trained
		Service Technician.
has continuous
air leak.
Regulator will	Damaged regulator	Have checked by a Trained
not shut off air		Service Technician.
outlet.

21- ENG A10055