Manuals / Porter-Cable / Lawn and Garden / Portable Generator

Porter-Cable D29833-038-0 Quick Facts, Always Refer to the Manuals Supplied with this Unit

Models: D29833-038-0

1 68
Download 68 pages 54.24 Kb
Page 22
Image 22

QUICK FACTS

CALL 1-888-559-8550 TO FIND A LOCAL AUTHORIZED SERVICE CENTER NEAR YOU FOR REPAIRS AND SERVICE PART PURCHASES

ENGINE

GAS

ENGINE OIL

WATTAGE

WIRING

BATTERY

VOLT REG.

ENGINE

STORAGE

OPERATION

Use clean, fresh gasoline with a minimum 87 octane rating. Do not add gasoline during or immediately after use.

Refer to engine owner's manual for oil recommendations. Most generators are equipped with a low-oil shutdown. If the oil is low or if the Generator is not level, the engine will not start.

Make wattage calculations before use. Refer to general operator's manual for further instructions.

Contact an electrician for any wiring instructions. If wiring into a house, a double-throw transfer switch and a heavy duty cord set must be used.

Use a standard (12V) lawn and garden battery with a minimum of 45 A.H. or 210 CCA.

The voltage and frequency are regulated by the rpm's of the engine. Do not adjust the throttle or governor to achieve higher performance. This will only alter the factory Pre-set settings and damage anything connected to the generator.

Be sure a volt/amp surge protector is used when sensitive electronic equipment is used, such as: televisions, computers, stereos, and etc… The damage of such equipment without the use of a protector WILL NOT be covered under warranty.

Do not adjust or attempt maintenance without consulting engine manual or an authorized engine service center.

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

When in long term storage, operate the generator every 60 days for at least 10 minutes with a load on it. This will prevent the loss of residual magnetism that produces the electricity.

Allow the generator to run 5 minutes at no load for the engine and the gen head to stabilize.

Make sure the adequate size of extension cord is used. Refer to the Grounding Instructions/Extension Cord section of the owners manual.

If the generator is operating equipment that is drawing half of the rated watts it is considered 50% load. Using all of the rated watts is considered 100% load.

ALWAYS REFER TO THE MANUALS SUPPLIED WITH THIS UNIT

D29833

22- ENG

Page 21 Page 23
Page 22
Image 22
Porter-Cable D29833-038-0 instruction manual Quick Facts, Always Refer to the Manuals Supplied with this Unit
Page 21 Page 23

D29833-038-0 specifications

The Porter-Cable D29833-038-0 is a versatile and powerful tool designed to cater to a variety of demanding applications, making it a favorite among both professionals and DIY enthusiasts. Known for its durability and performance, this model stands out in the competitive market of woodworking and construction tools.

One of the key features of the D29833-038-0 is its robust motor, which provides ample power for a range of tasks, from sanding to cutting. With a strong horsepower rating, this tool ensures efficiency and effectiveness, enabling users to complete projects in a fraction of the time it would typically take with less powerful equipment.

The design of the Porter-Cable D29833-038-0 emphasizes user comfort and control. It comes equipped with an ergonomic handle that reduces user fatigue during extended use. This aspect is particularly beneficial for those who manage large-scale projects or spend several hours on the job. The thoughtful design extends to its weight distribution, allowing for better maneuverability without compromising stability.

In addition to its physical characteristics, the D29833-038-0 features advanced technology that enhances its functionality. This includes variable speed settings that allow users to adjust the tool's performance based on the material and task at hand, thus providing greater versatility. The integrated dust collection system minimizes mess and ensures a cleaner workspace, which is essential for maintaining focus and safety during operations.

Another noteworthy characteristic is the compatibility of the D29833-038-0 with a wide range of accessories and attachments. This adaptability enables users to switch between tasks seamlessly, whether they're sanding, cutting, or shaping materials. The convenience of quick-release mechanisms also ensures that changing accessories is both quick and hassle-free.

Safety features have not been overlooked in the design of the Porter-Cable D29833-038-0. The tool is built with protective guards and features that help prevent accidents, making it suitable for users of varying experience levels.

In summary, the Porter-Cable D29833-038-0 combines power, ergonomic design, advanced technology, and safety features, making it an outstanding choice for anyone looking to enhance their toolkit. Whether you’re a professional contractor or a passionate DIYer, this tool is designed to deliver reliable performance across multiple applications, ensuring that every project is completed with precision and ease.